January has been a great month for railroading.\u00a0 I’ve been attending events for the past three weekends, and have yet another this Saturday coming.<\/p>\n
The Crescent City Model Railroad Club in New Orleans held their annual open house early in the month.\u00a0 They’re in the process of converting their layout to DCC operation, and since the layout would be down, they decided to remodel several major sections.\u00a0 Wayne Robichaux and I went down to inspect their progress and also to hit the few remaining hobby shops in the area.\u00a0 Unfortunately there doesn’t seem to be a single decent model railroad shop left in south Louisiana.\u00a0 A few shops we hit had nice selections of Lionel and similar, but us “scale” guys are left in the cold.<\/p>\n
The following weekend Ron Findley and I drove over to Hattiesburg, Mississippi to attend the annual banquet of the Mississippi Great Southern Chapter of the NRHS.\u00a0 Those folks put on a fine get-together.\u00a0 There were several vendors displaying their wares, the dinner was good, and the guest speaker was quite interesting.\u00a0 It was good seeing old friends and acquaintances over there.<\/p>\n
This past Saturday several of us drove over to Covington to operate on Lou Schultz’s C&O layout.\u00a0 Overall the session went well, there were plenty of snacks to chow down on, and as usual, it was good to meet with fellow model railroaders.<\/p>\n
And finally, this Saturday, January 26th, there will be the Train Day at the Library<\/em> event at one of the local libraries here in Baton Rouge.\u00a0 There will be numerous displays about railroading (prototype and modeling), possibly a display layout, and many slide presentations by Forrest Becht, a noted railfan and photographer.<\/p>\n Oh, BTW . . . I actually managed to get a bit of track laid on the Louisiana Central.\u00a0 I’ve been struggling back in the corner of the room it seems forever, but we’re finally getting rail down.\u00a0 I’m using Atlas code 83 track and switches for my hidden track (which is what I’m laying presently), and I’m not too impressed with the construction of the switches with regards to soldering jumper wires to them.\u00a0 Soldering rail feeders isn’t too big a deal, but soldering jumpers to the points is!\u00a0 They’re just formed sheet metal and I found it quite difficult to tack a wire to the lower portion of the point so it would clear wheel flanges.\u00a0 Despite my efforts, I had to do considerable filing afterwards to clear the NMRA gauge nubs.\u00a0 And the frog . . . what a pain!\u00a0 The frog doesn’t accept solder well, but there is a small tab with a hole sticking out to one side of the frog.\u00a0 I couldn’t find my taps, so drove to a friend’s house for him to tap the holes for me.\u00a0 Then I screwed a 1-72 screw to each and added a nut to the bottom.\u00a0 I placed a dab of solder below the nut so it will never come loose, then soldered a jumper to the screw.\u00a0 Despite the precautions I took (good hot iron with freshly tinned tip, and a fast in and out technique) the thin plastic surrounding the tab melted away and the cast frog on one switch came loose from its mounting in the switch.\u00a0 Now I need to figure out what kind of adhesive I need to use to adhere metal to slippery plastic so as to permanently reattach the frog on that switch.<\/p>\n That’s about it for now.\u00a0 My main focus on the layout will be to get track laid, hopefully at a steady rate.\u00a0 Leave a comment if you have any questions or suggestions.<\/p>\n -Jack<\/em><\/p>\n","protected":false},"excerpt":{"rendered":" January has been a great month for railroading.\u00a0 I’ve been attending events for the past three weekends, and have yet another this Saturday coming. The Crescent City Model Railroad Club in New Orleans held their annual open house early in … Continue reading